Brake Caliper Cooling Fins for Brembo Hypure – BPR07 DBK

DBK Caliper Cooling Fins: Brembo Hypure Series

The DBK Special Parts Brake Caliper Cooling Fins (Part# BPR07) are a high-performance thermodynamic upgrade designed for riders who push their braking systems to the limit. Designed specifically for the Brembo Hypure calipers, these fins act as a radiator for your brakes, pulling heat away from the pads and fluid to maintain optimal stopping power. By increasing the external surface area of the brake caliper, these fins facilitate rapid heat dissipation, significantly reducing the risk of brake fade and ensuring consistent lever feel during aggressive track sessions or alpine descents.

The DBK Technical Edge

• Increased Radiating Surface: The precision-milled fins exponentially increase the surface area of the caliper exposed to airflow. This allows for significantly faster cooling as air passes over the fins at speed.
• 7075-T6 Billet Aluminum: Machined from high-thermal-conductivity “Ergal” aluminum. This material is chosen for its ability to transfer heat rapidly while maintaining structural integrity under extreme temperatures.
• Hard-Anodized Finish: Available in Red and Silver. The anodized layer is formulated to withstand the intense heat cycles of the caliper without discoloring or flaking.
• Strategic Airflow Design: The geometry of the fins is optimized to catch the air coming off the front wheel, directing it through the cooling channels to maximize the convective cooling effect.

📊 Technical Specifications

🏍️ Model Compatibility

The BPR07 is a universal fit for any motorcycle factory-equipped with Brembo Hypure calipers, including:

• Ducati: Panigale V4/V4S/V4R, Streetfighter V4/V4S.
• Aprilia: RSV4 (2025+), Tuono V4 Factory (2025+).

🛡️ Why Install Cooling Fins?

1. Eliminate Brake Fade: Under repeated heavy braking, brake fluid can overheat and expand, leading to a “spongy” lever. These fins help keep the fluid temperature below the boiling point.
2. Extend Pad Life: By reducing the operating temperature of the brake pads, the BPR07 helps prevent “glazing,” which occurs when pads are overheated, resulting in a loss of friction.
3. The “Factory” Look: Beyond the performance benefits, the cooling fins provide a technical, high-end appearance found on professional World Superbike (WSBK) and MotoGP machinery.

❓ FAQ: Tech Support

Does this require removing the brake lines?

No. The BPR07 kit is designed to mount externally onto the caliper using the provided hardware. You do not need to open the hydraulic system or bleed the brakes for installation.

Will this fit the older M50 calipers?

No. The BPR07 is specifically contoured for the Hypure architecture. For M50 calipers, please refer to the BPR01 series.

Do they rattle?

No. Every kit is machined to tight tolerances and includes high-quality mounting hardware to ensure a silent, secure fit even under high vibration.

Upgrade your Brembo Caliper Hypure® with our Brake Caliper Cooling Fins and upgrade your ride!

Installation instructions/BPR07